Menu
| Model | SM10-816G |
| Motor type | 10mm geared stepper motor |
| Coil resistance | 31Ω±10% |
| OEM & ODM Service | AVAILABLE |
| Step angle | 18 degree |
| No. of phases | 2 phases |
| Lead screw type | M3 |
| Minimum order quantity | 1unit |
This is a combination of a miniature stepper motor with a motor diameter of 10MM plus a precision metal gearbox. In addition, we have 6mm, 8mm, 10mm, 15mm and 20mm diameter motors for customers to choose from.
The step angle of this motor is 18 degrees, i.e. 20 steps per revolution. With the deceleration effect of the gearbox, the final motor rotation angle resolution can reach 0.05~6 degrees, which can be used for a variety of requirements and precise control of rotation position.
Customers can match the gear speed ratio according to different requirements of using torque speed, and the gearbox has 1:2 – 1:1000 gear ratio for customers to choose.
| Model No. | SM10-816G |
| Motor diameter | 10mm |
| Coil resistance | 30Ω±10%/phase |
| Number of phase | 2 phases |
| Step angle | 18°/step |
| Weight | 15 g |
| OEM&ODM SERVICE | AVAILABLE |
| EFFICIENCY | 10-20% |
The gear box has high precision, high efficiency and low noise, which makes the product have good reliability.
The power input position of the stepper motor can be in the form of FPC, FFC, PCB cable, etc.
The output shaft of the motor can adopt various output structures, such as circular shaft, D-shaft and wire bar.
10mm geared stepper motor Customisable directions
Wiring Method:
FPC、pcb、Horizontal, vertical.
thread length：Can be customised on request
Motor out shaft type:
D-axis, screw
Reduction gearbox type
10mm micro stepper motor with gearbox and encoder:
10mm micro stepper motor with resistor
| Gear ratio | 2:1 | 5:1 | 10:1 | 15:1 | 20:1 | 30:1 | 36:1 | 50: | 63:1 | 67:1 | 89:1 | 100:1 |
| Precise ratio | 2.002 | 4.995 | 9.677 | 14.754 | 20.501 | 29.120 | 36.122 | 51.103 | 63.071 | 66.801 | 89.227 | 99.002 |
| Gear ratio | 23 | 20 | 13 | 18 | 15 | 12 | 20 | 20 | 14 | 17 | 14 | 13 |
| Gear levels | 2 | 2 | 2 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 4 | 4 |
| Efficiency | 80% | 80% | 80% | 72% | 72% | 72% | 65% | 65% | 65% | 65% | 65% | 65% |
| Input and output directions | + | + | + | – | – | – | + | + | + | + | + | + |
| Gear ratio | 120:1 | 150:1 | 172:1 | 210:1 | 250:1 | 275:1 | 298:1 | 380:1 | 420:1 | 500:1 | 600:1 | 1000:1 |
| Precise ratio | 118.922 | 150.948 | 171.883 | 210.591 | 250.111 | 274.403 | 297.924 | 387:689 | 421.296 | 506.155 | 599.394 | 986.406 |
| Gear ratio | 17 | 18 | 13 | 12(15) | 13 | 12 | 12 | 12 | 12 | 18 | 16 | 12 |
| Gear levels | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 7 | 7 | 7 |
| Efficiency | 59% | 59% | 59% | 59% | 59% | 59% | 59% | 59% | 59% | 47% | 47% | 47% |
| Input and output directions | – | – | – | – | – | – | – | – | – | – | – | – |
Geared stepper motors + encoders
Geared stepper motors + dust jacket
Selection of different motors with gearboxes：Stepper motors or DC motors
Geared stepper motors, widely used in Smart home, personal care, home appliance equipment, smart medical equipment, smart robot, smart logistics, smart cars, communication equipment, smart wearable devices, consumer electronics, camera equipment, and other industries.
Standard motors in stock: within 3 days
Standard motors not in stock: within 15 days
Customized products: About 25~30 days (based on complexity of customization)
Lead time for building a new mold: generally about 45 days
Lead time for mass production: based on order quantity
Samples are packed in foam sponge with a paper box, shipped by express
Mass production, motors are packed in corrugated cartons with transparent film outside. (shipping by air)
If shipped by sea, product will be packed on pallets
On samples and air shipping , we use Fedex/TNT/UPS/DHL. (5~12 days for express service)
For sea shipping, we use our shipping agent, and ship from Shanghai port. (45~70 days for sea shipping)
Yes, we are a manufacture, and we produces mainly stepper motors.
Our factory is located in Changzhou, Jiangsu. Yes, you are very welcome to visit us.
No, we don’t provide free samples. Customers won’t treat free samples fairly.
Customers pay for shipping cost. We will quote you shipping cost.
If you think you have cheaper/more convenient shipping method, we can use you shipping account.
We don’t have MOQ, and you can order only one piece sample.
But we recommend you to order a little bit more, just in case the motor is damaged during your testing, and you can have a back-up.
We have over 20 years of experience in stepper motor industry.
We have developed many projects, we can provide full set customization from design drawing to production.
We are confident we can give you few advice/suggestions for your stepper motor project.
If you are worrying about confidential issues, yes, we can sign a NDA contract.
Yes, we do sell drivers. They are only suitable for temporary sample test, not suitable for mass production.
We do not produce drivers, we only produce stepper motors