The SM25-412L stepper motor is mainly used in printers, valves, fluid control, position control and other fields.
This motor has the features of small size, high precision and high strength.
This stepper motor has a built-in gearbox with a reduction ratio of 1:10.
Finally, an output top rod with a stop structure is used so that the plunger can move back and forth without rotating.
The thrust force can be up to 10 kg.
JST PHR-4 P2.0 is chosen for the exterior of this motor, and the wiring part can be selected from various types and lengths of connecting wires or FPC FFC according to customer requirements. the shape of the mounting plate and the exit angle can be adjusted according to customer needs!
| Model No. | 25BYJ 412L |
| Motor diameter | 25mm gearbox linear stepper motor |
| Gearbox ratio | 10:1 |
| Drive voltage | 2.2~3.4V DC |
| Coil resistance | 5Ω±10%/phase |
| Number of phase | 2 phases |
| Stroke | 5mm |
| Step angle | 7.5°/10 |
| Thrust | 70N Min(2.6V 350PPS) |
| Pull-in frequency | 750PPS (2.6V DC) |
| Pull-out frequency | 800PPS (2.6V DC) |
| Step length | 0.002mm/step |
| Spindle | Tr3.5*P1.0 |
| OEM&ODM SERVICE | AVAILABLE |
| Inductance | 3mH(Ref) |
The following picture shows the product assembly:
The gear box has high precision, high efficiency and low noise, which makes the product have good reliability.
The power input position of the stepper motor can be in the form of FPC, FFC, PCB cable, etc.
The output shaft of the motor can adopt various output structures, such as circular shaft, D-shaft and wire bar.
25mm geared stepper motor Customisable directions
Wiring Method：
FPC、pcb、Horizontal, vertical.
thread length：Can be customised on request
Motor out shaft type:
D-axis, screw
Reduction gearbox type
10mm micro stepper motor with gearbox and encoder：
10mm micro stepper motor with resistor
Geared stepper motors, widely used in Smart home, personal care, home appliance equipment, smart medical equipment, smart robot, smart logistics, smart cars, communication equipment, smart wearable devices, consumer electronics, camera equipment, and other industries.
Standard motors in stock: within 3 days
Standard motors not in stock: within 15 days
Customized products: About 25~30 days (based on complexity of customization)
Lead time for building a new mold: generally about 45 days
Lead time for mass production: based on order quantity
Samples are packed in foam sponge with a paper box, shipped by express
Mass production, motors are packed in corrugated cartons with transparent film outside. (shipping by air)
If shipped by sea, product will be packed on pallets
On samples and air shipping , we use Fedex/TNT/UPS/DHL. (5~12 days for express service)
For sea shipping, we use our shipping agent, and ship from Shanghai port. (45~70 days for sea shipping)
Yes, we are a manufacture, and we produces mainly stepper motors.
Our factory is located in Changzhou, Jiangsu. Yes, you are very welcome to visit us.
No, we don’t provide free samples. Customers won’t treat free samples fairly.
Customers pay for shipping cost. We will quote you shipping cost.
If you think you have cheaper/more convenient shipping method, we can use you shipping account.
We don’t have MOQ, and you can order only one piece sample.
But we recommend you to order a little bit more, just in case the motor is damaged during your testing, and you can have a back-up.
We have over 20 years of experience in stepper motor industry.
We have developed many projects, we can provide full set customization from design drawing to production.
We are confident we can give you few advice/suggestions for your stepper motor project.
If you are worrying about confidential issues, yes, we can sign a NDA contract.
Yes, we do sell drivers. They are only suitable for temporary sample test, not suitable for mass production.
We do not produce drivers, we only produce stepper motors