This motor is a 35mm diameter high torque decelerating stepping motor with a body height of 35.8mm.
The output shaft of the motor can be customized to install gears and synchronous pulleys.
After the stepping motor is equipped with a gearbox, the step angle is further subdivided to increase the load torque and control more accurately.
Conventional gear reduction ratios include 3.7, 3.82, 5.2, 5.36, 13.7, 14.62, 19.2, 20.51, 26.85, 28.77, 51, 71100139.
Suitable gear reduction ratios can be recommended according to customer needs.
The output part of the motor is usually a connecting line, or a customized socket.
The mission of the motor is more than 10,000 hours, and the life of the gear is more than 2000 hours.
| Product Name | 35mm Geared stepper motor |
| Model | PM35L-048-376- 120G |
| Resistance | 30Ω±7% |
| Current Per Phase | 400 mA/phase |
| Type | Permanent Magnet |
| Phase | 2 |
| Certification | ROHS |
| Holding Torque | 9000g.cm / 200PPS |
| Diameter | 35mm |
| Rated voltage | 12 V |
| Pull in Rate | 400pps |
| Geaar ratio | 3.7-139 |
| weight | 180g |
| OEM & ODM SERVICE | AVAILABLE |
| Number of gear trains | 1 | 2 | 3 |
| Gear ratioi | 3.7 | 13.7 | 51 |
| 3.82 | 14.62 | 71 * | |
| 5.2 * | 19.2 * | 100 * | |
| 5.36 | 20.51 | 139 * | |
| 26.85 * | |||
| 28.77 | |||
| Length of gearbox(mm) | 30.9 | 37.5 | 44.1 |
All gears are metal, and the gear reduction ratio marked with * can be customized as plastic gears, which have the advantages of low noise and cheaper price.
The gear box has high precision, high efficiency and low noise, which makes the product have good reliability.
The power input position of the stepper motor can be in the form of FPC, FFC, PCB cable, etc.
The output shaft of the motor can adopt various output structures, such as circular shaft, D-shaft and wire bar.
35mm geared stepper motor Customisable directions
Wiring Method：
FPC、pcb、Horizontal, vertical.
thread length：Can be customised on request
Motor out shaft type:
D-axis, screw
Reduction gearbox type
10mm micro stepper motor with gearbox and encoder
10mm micro stepper motor with resistor
Geared stepper motors, widely used in Smart home, personal care, home appliance equipment, smart medical equipment, smart robot, smart logistics, smart cars, communication equipment, smart wearable devices, consumer electronics, camera equipment, and other industries.
Standard motors in stock: within 3 days
Standard motors not in stock: within 15 days
Customized products: About 25~30 days (based on complexity of customization)
Lead time for building a new mold: generally about 45 days
Lead time for mass production: based on order quantity
Samples are packed in foam sponge with a paper box, shipped by express
Mass production, motors are packed in corrugated cartons with transparent film outside. (shipping by air)
If shipped by sea, product will be packed on pallets
On samples and air shipping , we use Fedex/TNT/UPS/DHL. (5~12 days for express service)
For sea shipping, we use our shipping agent, and ship from Shanghai port. (45~70 days for sea shipping)
Yes, we are a manufacture, and we produces mainly stepper motors.
Our factory is located in Changzhou, Jiangsu. Yes, you are very welcome to visit us.
No, we don’t provide free samples. Customers won’t treat free samples fairly.
Customers pay for shipping cost. We will quote you shipping cost.
If you think you have cheaper/more convenient shipping method, we can use you shipping account.
We don’t have MOQ, and you can order only one piece sample.
But we recommend you to order a little bit more, just in case the motor is damaged during your testing, and you can have a back-up.
We have over 20 years of experience in stepper motor industry.
We have developed many projects, we can provide full set customization from design drawing to production.
We are confident we can give you few advice/suggestions for your stepper motor project.
If you are worrying about confidential issues, yes, we can sign a NDA contract.
Yes, we do sell drivers. They are only suitable for temporary sample test, not suitable for mass production.
We do not produce drivers, we only produce stepper motors