Menu
| Motor type: | 10mm stepper motor |
| Step angle: | 18 degrees/gear ratio |
| No. of phases | 2 phases (Bipolar) |
| Rated voltage | 5V DC |
| Coil resistance | 40Ω/phase |
| Gearbox type | 1024GB horizontal gearbox |
| Gear ratio | 10:1~1000:1 |
This is a 1024GB horizontal gearbox attached with a 10mm micro stepper motor.
We have different gear ratio for option, from 10:1 to 1000:1.
With higher gear ratio, motor’s output torque will be higher, and output speed will be slower.
The choice of gear ratio depends on customers want more torque, or more speed.
Here is calculation:
Output torque=single motor’s torque*gear ratio* gearbox efficiency
Output speed= single motor’s speed/gear ratio
Output shaft can be customized into D shaft, lead screw shaft or other shaft types.
| Model No. | 10-817G |
| Motor diameter | 10mm |
| Drive voltage | 5V DC |
| Coil resistance | 40Ω±10%/phase |
| Number of phase | 2 phases (bipolar) |
| Step angle | 18°/ gear ratio |
| 30:1 | 50:1 | 100:1 | 150:1 | 300:1 | 323:1 | 483:1 | 500:1 | 668:1 |
| 30.401 | 49.914 | 100.303 | 144.522 | 299.358 | 323.275 | 483.277 | 496.540 | 668.102 |
| 13 | 15 | 12 | 14 | 18 | 12 | 12 | 12 | 12 |
| 4 | 4 | 4 | 6 | 6 | 6 | 6 | 6 | 6 |
| 65% | 65% | 65% | 53% | 53% | 53% | 53% | 53% | 53% |
Output shaft can be customized into M3 lead screw, or other shape for special projects.
In general, motor is assembled on top of the gearbox, there is also another option, that motor be can be assembled at the bottom.
Geared stepper motors, widely used in Smart home, personal care, home appliance equipment, smart medical equipment, smart robot, smart logistics, smart cars, communication equipment, smart wearable devices, consumer electronics, camera equipment, and other industries.
Standard motors in stock: within 3 days
Standard motors not in stock: within 15 days
Customized products: About 25~30 days (based on complexity of customization)
Lead time for building a new mold: generally about 45 days
Lead time for mass production: based on order quantity
Samples are packed in foam sponge with a paper box, shipped by express
Mass production, motors are packed in corrugated cartons with transparent film outside. (shipping by air)
If shipped by sea, product will be packed on pallets
On samples and air shipping, we use Fedex/TNT/UPS/DHL. (5~12 days for express service)
For sea shipping, we use our shipping agent, and ship from Shanghai port. (45~70 days for sea shipping)
Yes, we are a manufacture, and we produces mainly stepper motors.
Our factory is located in Changzhou, Jiangsu. Yes, you are very welcome to visit us.
No, we don’t provide free samples. Customers won’t treat free samples fairly.
Customers pay for shipping cost. We will quote you shipping cost.
If you think you have cheaper/more convenient shipping method, we can use you shipping account.
We don’t have MOQ, and you can order only one piece sample.
But we recommend you to order a little bit more, just in case the motor is damaged during your testing, and you can have a back-up.
We have over 20 years of experience in stepper motor industry.
We have developed many projects, we can provide full set customization from design drawing to production.
We are confident we can give you few advice/suggestions for your stepper motor project.
If you are worrying about confidential issues, yes, we can sign a NDA contract.
Yes, we do sell drivers. They are only suitable for temporary sample test, not suitable for mass production.
We do not produce drivers, we only produce stepper motors